논문 정정: 비특이화 간접경계적분방정식방법을 이용한 2차원 수치수조 개발 및 적용

Erratum to: Development and Application of Two-Dimensional Numerical Tank using Desingularized Indirect Boundary Integral Equation Method

Article information

J. Ocean Eng. Technol. 2019;33(1):98-98

Publication date (electronic) : 2019 February 27

doi : https://doi.org/10.26748/KSOE.2018.060e1

Seunghoon Oh^,^*

, Seok-kyu Cho ^*

, Dongho Jung ^*

, Hong Gun Sung ^*

^*Korea Research Institute of Ships and Ocean Engineering, Daejon, Korea

오승훈^,^*

, 조석규^*

, 정동호^*

, 성홍근^*

^*한국해양과학기술원 부설 선박해양플랜트연구소

Corresponding author Seunghoon, Oh: +82-42-866-3921, carot541@kriso.re.kr

It is noted that this paper is revised edition based on proceedings of KAOST 2018 in Jeju.

Received 2019 January 16; Revised 2019 February 22; Accepted 2019 February 22.

Erratum to: Journal of Ocean Engineering and Technology 32(6), 447–457, December, 2018 https://doi.org/10.26748/KSOE.2018.32.6.447

논문 정정: 한국해양공학회지 제32권 제6호, pp 447-457, 2018년 12월 https://doi.org/10.26748/KSOE.2018.32.6.447

위의 논문 450쪽의 Fig. 2에서 ‘?t’는 ‘∆t’의 잘못된 표기이고, F_i(t)는 Φ_i(t)의 잘못된 표기이므로, 다음의 수정 후와 같이 정정합니다.

수정 전 Fig. 2

Fig 2

Schematic diagram for semi-Lagrangian approach

수정 후 Fig. 2

Fig. 2

Schematic diagram for semi-Lagrangian approach

Article information Continued

This is an open access article distributed under the terms of the creative commons attribution non-commercial license (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Fig 2

Schematic diagram for semi-Lagrangian approach

Fig. 2

Schematic diagram for semi-Lagrangian approach