J. Ocean Eng. Technol. Search

CLOSE


J. Ocean Eng. Technol. 2005;19(1):71-76.    

A Basic Structural Design for Large Floating Crane
PARK CHAN-HU;KIM BYUNG-WOO;HA MUN-KEUN;CHUN MIN-SUNG;
Marine Research Institute, Samsung Heavy Industries;Marine Research Institute, Samsung Heavy Industries;Marine Research Institute, Samsung Heavy Industries;Marine Research Institute, Samsung Heavy Industries;
대형 해상크레인의 구조 기본 설계
박찬후;김병우;하문근;전민성;
삼성중공업 조선해양연구서;삼성중공업 조선해양연구서;삼성중공업 조선해양연구서;삼성중공업 조선해양연구서;
Copyright © 2005 The Korean Society of Ocean Engineers     Open access / Under a Creative Commons License
Key Words: Floating Crane, Barge, Fixed Undulation Type, Unity Check
핵심용어: 해상크레인, 바아지, 비선회 기복식, 허용 응력비
Abstract
This paper describes basic structural design for the large floating crane barge of fixed undulation type. Structural analysis was performed separately after dividing the floating crane into two parts, The crane part was composed of jib boom, back stay and back tower and the barge part supported the crane part. The structural strength for jib boom structural members are in compliance with JIS B 8821 and scantling of all barge structural members are in compliance with the requirement of KR (Korean Register of Shipping) Steel Barges and Rules for Classification of Steel Ships. For the structural analysis of large floating crane, MSC/NASTRAN and MSC/PATRAN software were used.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY

Browse all articles >

PUBLICATION ETHICS
FOR CONTRIBUTORS
Editorial Office
President Office BD Rm. 1302, 13 Jungang-daero 180beon-gil, Dong-gu, Busan 48821, Republic of Korea
Tel: +82-51-759-0656    Fax: +82-51-759-0656    E-mail: ksoehj@ksoe.or.kr                

Copyright © 2022 by The Korean Society of Ocean Engineers.

Developed in M2PI

Close layer
prev next