J. Ocean Eng. Technol. Search

CLOSE


J. Ocean Eng. Technol. 2003;17(5):88-94.    

A Study on the Hull Form Development of the 25 Knots Class Planing Hull Form Fishing Boat
LEE KWI-JOO;JOA SOON-WON;PARK MYUNG-KYU;SHIN YOUNG-KYUN;
Department of Naval Architecture and Ocean Engineering, Chosun University;Department of Naval Architecture and Ocean Engineering, Chosun University;Department of Marine Systems Engineering, Korea Maritime University;Special & Naval Ship Design Team, STX S
25노트급 활주형 어선의 기본선형 개발에 관한 연구
이귀주;좌순원;박명규;신영균;
조선대학교 선박해양공학과;조선대학교 선박해양공학과;한국해양대학교 해양시스템공학부;STX조선(주);
Copyright © 2003 The Korean Society of Ocean Engineers     Open access / Under a Creative Commons License
핵심용어: Resistance Test 저항시험, Wave Pattern Observation 파형관찰, Inverted Bell Cross-section Type Bow 볼록-오목 단면형 선수, Deep V Type Bow 선수 선형
Abstract
A series of tests of 5 model ships, selected from a data survey of 10 Gross Tonnage actual fishing boats, were performed in two circulating water channels (Chosun University in Korea and WJFEL in Japan), in order to develop the basic hull form of a 25 knots-class fishing boat. Resistance tests, trim and sinkage measurements and wave pattern observations etc., were included in each I1wdel test, and the model test results were compared and analyzed. The result was as follows: P-4 hull form ship changed into Deep V type bow is the best hull form with good performance, especially with regard to ship's resistance efficiency.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY

Browse all articles >

PUBLICATION ETHICS
FOR CONTRIBUTORS
Editorial Office
President Office BD Rm. 1302, 13 Jungang-daero 180beon-gil, Dong-gu, Busan 48821, Republic of Korea
Tel: +82-51-759-0656    Fax: +82-51-759-0656    E-mail: ksoehj@ksoe.or.kr                

Copyright © 2022 by The Korean Society of Ocean Engineers.

Developed in M2PI

Close layer
prev next