Influence of Shot Peening on the Corrosion of Spring Steel

J. Ocean Eng. Technol. 2003;17(3):39-45.

HA KYUNG-JUN;PARK KYUNG-DONG;

School of Mechanical Engineering, Pukyong National University;School of Mechanical Engineering, Pukyong National University;

스프링강의 부식에 미치는 쇼트피닝의 영향

하경준;박경동;

부경대학교 기계공학부;부경대학교 기계공학부;

핵심용어: Shot Peening 쇼트피닝, Spring Steel 스프링강, Corrosion 부식, Protection 방식, Immersion Test 침지시험, Residual Stress 잔류응력, Polarization Curve 분극곡선

Abstract

Shot peening is an effective method of improving the fatigue strength of components and structures. The compressive residual stress produced by surface plastic deformation with shot peening is usually regarded as the major factor in increasing fatigue strength. In this study, the influence of shot peening on corrosion was investigated. Spring steel immersed in $3.5\%$ NaCl prior was used to evaluate the effect of shot peening on fatigue properties. The immersion test was performed on the five kinds of specimens with shot peened and unpeened. The distributions of residual stresses of shot peened spring steels were measured in an X-ray diffraction apparatus, using the two-point method. Corrosion potential, polarization curve, residual stress, etc. were investigated, based on the experimental results. From test results, the effect of shot peening on the corrosion was evaluated.