Analyses of the Maximum Response of Cylinders-Connected Protector under Anchor Colliding and Dragging |
Woo Jin-Ho,Na Won-Bae |
Department of Ocean Engineering Pukyong National University,Department of Ocean Engineering Pukyong National University |
앵커 충돌 및 끌림에 의한 원통연결 보호구조물의 최대 응답 해석 |
우진호,나원배 |
부경대학교 해양공학과,부경대학교 해양공학과 |
|
© 2010 The Korean Society of Ocean Engineers
Open access / Under a Creative Commons License
|
Keywords:
Collision, Lift, Anchor, Cylinders-connected protector, Concrete, Finite element analysis |
핵심용어:
충돌, 들림, 앵커, 원통연결 보호구조물, 콘크리트, 유한요소해석 |
Abstract |
This study presents the results of collision and lift analyses of a cylinders-connected protector under stock anchor colliding and dragging. For the analyses, the terminal velocity of the stock anchor was obtained first, and, then, the velocity was used to calculate the falling distance of the stock anchor in air. In addition, two other falling distances were considered for purposes of comparison. From the finite element analyses, using ANSYS, the maximum responses obtained from the stock anchor colliding and dragging were obtained and compared for different collision distances (3, 5, and 8.83 m) and dragging angles (0, 30, 60, $90^{circ}$). Then, the maximum displacements and stresses were discussed, along with the strength and dimensions of the protector. Finally, conclusions were made for the maximum responses. |
|