J. Ocean Eng. Technol. Search

CLOSE


J. Ocean Eng. Technol. 2004;18(1):47-52.    

Model Test for the Development of Installing Manipulator of Concrete Pile Anchor
콘크리트 파일앵커의 설치 매니퓨레이터의 개발을 위한 모형실험에 관한 연구
윤길수,김호상
부경대학교 환경 · 해양대학 해양공학과,국립수산과학원 어업생산공학과
Copyright © 2004 The Korean Society of Ocean Engineers     Open access / Under a Creative Commons License
Key Words: Concrete Pile Anchor, Installing Manipulator, Model Test, Uplift Pulling Force, Buoyancy Controller, Weight, Saturation Diving
핵심용어: 콘크리트 파일앵커, 설치장치, 모형시험, 인발력, 부력조절기, , 포화잠수
Abstract
Greater holding force of an anchor is required for maintaining the position of a larger floating structure. According to the series of model tests of pile anchors with movable fluke, the square type pile anchor, with fluke, showed more than 6 times of the uplift pulling force, compared to the same type pile anchor, without fluke. This uplift force is 100 times its weight. When the water depth is more than 40m, It is difficult to install the pile anchor. For a convenient installation method, a type of manipulator is proposed for the separation of a weight and buoyancy controller, using TRIZ.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY

Browse all articles >

PUBLICATION ETHICS
FOR CONTRIBUTORS
Editorial Office
President Office BD Rm. 1302, 13 Jungang-daero 180beon-gil, Dong-gu, Busan 48821, Republic of Korea
Tel: +82-51-759-0656    Fax: +82-51-759-0656    E-mail: ksoehj@ksoe.or.kr                

Copyright © 2023 by The Korean Society of Ocean Engineers.

Developed in M2PI

Close layer
prev next