J. Ocean Eng. Technol. Search

CLOSE


J. Ocean Eng. Technol. 2001;15(1):85-91.    

Strength Evaluation of a Doubler Plate of a Ship S011c111re subjected to Biaxial In-plane Compression and Shear Load
양축방향 면내압축과 전단하중을 받는 선박 이중판의 강도 평가
함주혁
한라대학교 기계공학부
© 2001 The Korean Society of Ocean Engineers     Open access / Under a Creative Commons License
Keywords: Biaxial in-plane compression and shear Load, Doubler, Strength evaluation, Contact effect, Elasto-plastic analysis, Buckling strength
핵심용어: 양축 면내 압축하중, 이중판, 강도평가, 접촉효과, 탄소성해석, 좌굴강도
Abstract
A study for the structural strength analysis on the doubler plate subjected biaxial in-plane compression and shear load has been performed through the systematic evaluation process. In order to estimate the proper static strength of the doubler plate, non-linear elasto-plastic analysis is introduced. Gap element modeling for contact effect between the main plate and the doubler is prepared and nonlinear analysis procedures are illustrated based on MSC/N4W. In addition, some design guides are suggested through the consideration of several important effects such as corrosion of main plate, doubler width, doubler length and doubler thickness. Finally, theses result are compared with a developed design formula based on the buckling strength and general trends. The design guides, according to the variation of design parameters are discussed.


ABOUT
BROWSE ARTICLES
ARTICLE CATEGORY

Browse all articles >

PUBLICATION ETHICS
FOR CONTRIBUTORS
Editorial Office
President Office BD Rm. 1302, 13 Jungang-daero 180beon-gil, Dong-gu, Busan 48821, Republic of Korea
Tel: +82-51-759-0656    Fax: +82-51-759-0656    E-mail: ksoehj@ksoe.or.kr                

Copyright © 2024 by The Korean Society of Ocean Engineers.

Developed in M2PI

Close layer
prev next