Aval, H.J., Serajzadeh, S., Kokabi, A.H.. (Evolution of Microstructures and Mechanical Properties in Similar and Dissimilar Friction Stir Welding of AA5086 and AA6061, Materials Science and Engineering A, 2011). 528(28):8071-8083 10.1016/j.msea.2011.07.056.
Callister, W.D.. (Materials Science and Engineering and Introduction 7th Edition John Wiley & Sons, New York: 2006.
Darras, B.M., Abed, F.H., Pervaiz, S., Abdu-Latif, A.. (Analysis of Damage in 5083 Aluminum Alloy Deformed at Different Strain Rates, Materials Science and Engineering A, 2013). 568, 143-149 10.1016/j.msea.2013.01.039.
Fan, X., Suo, T., Sun, Q., Wang, T.. (Dynamic Mechanical Behavior of 6061 al Alloy at Elevated Temperatures and Different Strain Rates, Acta Materialia, 2013). 26(2):111-120.
Gere, J.M., Goodno, B.J.. (Mechanics of Materials 7th Edition Cengage Learning, Toronto: 2009.
Kim, K.Su., Boo, S.H., Park, C.Y., Cho, Y.G., Lee, J.S.. (An Experimental Study on the Tensile and Fatigue Strengths of SUS304L Lap Joint Weld at the Cryogenic Temperature, Journal of Ocean Engineering and Technology, 2008). 22(3):96-102 (In Korean).
Kim, J.H., Park, W.S., Chun, M.S., Kim, J.J., Bae, J.H., Kim, M.H., Lee, J.M.. (Effect of Pre-straining on Low-temperature Mechanical Behavior of AISI 304L, Materials Science and Engineering A, 2012). 543, 50-57 10.1016/j.msea.2012.02.044.
Kim, J.K., Kim, C.S, Kim, D.S., Yoon, I.S.. (Fatigue Crack Growth Behavior of Membrane Material for LNG Storage Tank at Low Temperatures, Journal of Ocean Engineering and Technology, 2000). 14(1):23-28 (In Korean).
Lee, K.J., Kim, T.W., Yoo, J.S., Yoo, S.W., Chun, M.S., Lee, J.M.. (Development of Temperature Dependent Damage Model for Evaluating Material Performance under Cryogenic Environment, Journal of Society of Naval Architects of Korea, 2008). 45(5):538-546 10.3744/SNAK.2008.45.5.538.
Lee, K.Y., Kim, T.H., Lee, H.Y.. (Acquirement of True Stress-strain Curve Using True Fracture Strain Obtained by Tensile Test and FE Analysis, Transactions of the Korean Society of Mechanical Engineers A, 2009). 33(10):1054-1064 10.3795/KSME-A.2009.33.10.1054.
Mahabunphachai, S., Koc, M.. (Investigations on Forming of Aluminum 5052 and 6061 Sheet Alloys at Warm Temperatures, Materials & Design, 2010). 31(5):2422-2434 10.1016/j.matdes.2009.11.053.
Moreira, P.M.G.P., Santos, T., Tavares, S.M.O., Trummer, V.R., Vilaca, P., Castro, P.M.S.T.. (Mechanical and Metallurgical Characterization of Friction Stir Welding Joints of AA6061-T6 with AA6082-T6, Materials & Design, 2009). 30(1):180-187 10.1016/j.matdes.2008.04.042.
Nam, K.W.. (Life Prediction of Fatigue Crack Propagation and Nondestructive Evaluation in 5083 Aluminum Alloy, Journal of Ocean Engineering and Technology, 2001). 15(2):94-98 (In Korean).
Nam, K.W., Lee, K.C.. (Frequency Characteristics of Acoustic Emission Singnal from Fatigue Crack Propagation in 5083 Aluminum by Joint Time-frequency Analysis Method, Journal of Ocean Engineering and Technology, 2003). 17(3):46-51 (In Korean).
Park, W.S., Chun, M.S., Han, M.S., Kim, M.H., Lee, J.M.. (Comparative Study on Mechanical Behavior of Low Temperature Application Materials for Ships and Offshore Structures: Part I-Experimental Investigations, Materials Science and Engineering A, 2011). 528(18):5790-5803 10.1016/j.msea.2011.04.032.
Picu, R.C., Vincze, G., Ozturk, F., Gracio, J.J., Barlat, F., Maniatty, A.M.. (Strain Rate Sensitivity of the Commercial Aluminum Alloy AA5182-O, Materials Science and Engineering A, 2005). 390(1-2):334-343 10.1016/j.msea.2004.08.029.
Ugural, A.C., Fenster, S.K.. (Advanced Strength and Applied Elasticity 4th Edition Prentice Hall, New Jersey: 2003.